Designed for outdoors, with a yellow flame delivering warm ambience and soft glowing light. Stainless steel construction with a flame failure device and Piezo ignition. All components are brass and stainless steel, and therefore corrosion-resistant.

The Real Fires Outdoor Flare comes complete with a stainless steel cover recommended for when the flare is not in use. It will be a focal point and feature of any patio or outdoor entertaining area, enhancing both the presentation and value of your home and property.

The Real Fires Outdoor Flare is designed for outside use only.

The Flare should be supported by means of a non-combustible solid base or shelf. The minimum height from ground level is 700mm to the base of the flare. The flame must be clear of any combustible material by 500mm either side. Clearance from combustible materials must be 2.5 metres. If this cannot be achieved, a fireproof reflector plate must be fitted with a minimum air gap of 25mm between it and the combustible surface.

Available in both LPG and natural gas.